1. TV with only one input. Input is used.
If a device, such as a DVD player or VCR is connected to your TV:
1
Unplug the device from the TV and plug it into the appropriate connectors marked IN on your
MovieBeam receiver.
2. Connect the A/V (and S-video) cables from the MovieBeam receiver's "OUT" connectors to the
TV's "IN" connectors as shown below. (Using the S-video cable is recommended.)
TV
S-VIDEO
R AUDIO L
VIDEO
Input #1
MovieBeam
receiver
IN
OUT
Setup 1-9
Basic Setup 1-
9
���
��
DVD/VCR
or other device