Sony LT30p User Manual page 80

All manuals and user guides at all-guides.com
To add a WLAN network manually
1 Make sure that WLAN is turned on.
2
From the Home screen, tap
3 Find and tap Settings > WLAN .
4 Tap .
5 Enter the Network SSID for the network.
6 Tap the Security field to select a security type.
7
If required, enter a password.
8 Tap Save.
WLAN network name is indicated as SSID, ESSID, Access Point, etc. Contact your WLAN
network administrator to get the Network SSID name and password.
Advanced WLAN settings
WLAN network status
When you are connected to a WLAN network or when there are WLAN networks
available in your vicinity, it is possible to see the status of these WLAN networks. You
can also enable your device to notify you whenever an open WLAN network is
detected.
To enable WLAN network notifications
1 Turn on WLAN, if it is not already on.
2 From your Home screen, tap
3 Find and tap Settings > WLAN.
4 Press .
5 Tap Advanced.
6 Mark the Network notification checkbox.
To view detailed information about a connected WLAN network
1 From the Home screen, tap
2 Find and tap Settings > WLAN.
3 Tap the WLAN network that you are currently connected to. Detailed network
information is displayed.
WLAN sleep policy
By adding a WLAN sleep policy, you can specify when to switch from WLAN to
mobile data.
If you are not connected to a WLAN network, your device uses a mobile data connection to
access the Internet (if you have set up and enabled a mobile data connection on your device).
To add a WLAN sleep policy
1 From the Home screen, tap
2 Find and tap Settings > WLAN.
3
Press .
4 Tap Advanced.
5 Tap WLAN sleep policy.
6 Select an option.
Sharing your mobile data connection
You can share your device's mobile data connection with a single computer using a
USB cable. This process is called USB tethering. You can also share your device's
data connection with up to eight other devices at once, by turning your device into a
portable WLAN hotspot.
When your device is sharing its data connection, the following icons may appear in
the status bar or in the Notification panel:
USB tethering is active
This is an Internet version of this publication. © Print only for private use.
.
.
.
.
80