Using Still Camera Settings - Sony LT30p User Manual

All manuals and user guides at all-guides.com
To take a photo using Smile Shutter™
1 When the camera is open and Smile Shutter is turned on, point the camera at
your subject. The camera selects which face to focus on.
2 The face selected appears inside a green frame and the photo is taken
automatically.
3
If no smile is detected, press the camera key to take the photo manually.

Using still camera settings

To adjust the still camera settings
1 Activate the camera.
2 To display all settings, tap
3 Select the setting that you want to adjust, then edit as desired.
To customise the still camera settings panel
1 When the camera is open, tap
2 Touch and hold the setting you want to move and drag it to the desired
position.
If you drag the setting outside of the settings panel, the change is cancelled.
Still camera settings overview
Superior auto
Optimise your settings to suit any scene.
Normal
Front camera
Select the front camera if you want to take self-portrait photos.
Picture effect
Apply effects to photos.
Scene selection
Sweep Panorama
Use this setting to take wide-angle, panoramic photos. Just press the camera key and move the
camera steadily from one side to the other.
Focus mode
The focus function controls which part of a photo should be sharp. When continuous
autofocus is on, the camera keeps adjusting focus so that the area within the yellow
focus frame stays sharp.
Single autofocus
The camera automatically focuses on the selected subject. Continuous autofocus is on. Touch and
hold the camera screen until the yellow focus frame turns blue, indicating that the focus is set. The
photo is taken when you release your finger.
Multi autofocus
The focus is automatically set on several areas of the image. Touch and hold the camera screen
until the yellow focus frame turns blue, indicating that the focus is set. The photo is taken when you
release your finger. Continuous autofocus is off.
Face detection
The camera automatically detects up to five human faces, indicated by frames on the screen. The
camera automatically focuses on the nearest face. You can also select which face to focus on by
tapping it on the screen. When you tap the camera screen, a blue frame shows which face is
selected and in focus. Face detection cannot be used for all scene types. Continuous autofocus is
on.
Touch focus
This is an Internet version of this publication. © Print only for private use.
.
to display all settings.
63