Table of Contents
Advertisement
System Agent PLL Voltage
Default is 0.900V. Each step is 0.0175V. Adding 9~15 steps will help CPU PLL to
lock internal clock during High frequency under Ln2 cooling. For Example: 1.0575V
~ 1.1625V will be proper value. But the voltage level will be different on each
processor. User has to find the best value for your own processor. VCCPLL Voltage
must be at least 150mV higher than the target PLL voltage, or your system will hang.
Memory Controller PLL Voltage
Default is 0.900V. Each step is 0.0175V. Adding 9~15 steps will help CPU PLL to
lock internal clock during High frequency under Ln2 cooling. For Example: 1.0575V
~ 1.1625V will be proper value. But the voltage level will be different on each
processor. User has to find the best value for your own processor. VCCPLL Voltage
must be at least 150mV higher than the target PLL voltage, or your system will hang.
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
It helps you to save current UEFI settings as an user profile to disk.
Load User UEFI Setup Profile from Disk
You can load previous saved profile from the disk.
86
Advertisement
Table of Contents
