What You Need To Know Before You Start - Rohl San Julio G7545 Manual

We are delighted that you have chosen the electronic instant hot water appliance to compli-
ment your instant hot water Dispenser. This unique electronic instant hot water appliance
will save you time and effort when requiring near boiling water for making tea and coffee
and we are sure you will discover many new uses each day.
Please read and follow our step by step guide to the installation, operation and care for the
electronic instant hot water appliance and you will soon be making that first cup of coffee or
tea from your new appliance.

WHAT YOU NEED TO KNOW BEFORE YOU START

For your safety and satisfaction please read all the instructions, cautions and warnings be-
fore installing or using this electronic instant hot water appliance.
This electronic instant hot water appliance is not intended for commercial use
IMPORTANT NOTICE: This product can cause harm if installed incorrectly and should only be
installed by a competent person, if you feel for any reason unsure about the installation
please contact a qualified plumber or electrician to install the appliance.
Make sure all electrical wiring and connections conform to local standards.
Make sure all water connections conform to local standards.
Make sure all electrical wiring and water connections conform to local codes. Standard 120v
electrical outlet is required under the sink. If possible, use a separate circuit dedicated to
your Hot Tank.
The instant hot water appliance is an open vented system appliance. The water supply
pressure should not exceed 72psi. If it does a pressure reducing valve must be installed.
The required water supply pressure is a minimum of 22psi to maximum of 72psi.
The water filter must be connected to the electronic instant hot water appliance and re-
placed every 6 months or the guarantee will be void.
Equipment Required:
Tape Measure Adjustable Wrench