Table of Contents
Advertisement
Formatting flash memory (PC)
1
Execute the yepp explorer.
- Double-click the icon of the Baby yepp Explorer on
the desktop.
2
Click [File], [Format] and select [OK].
N N o o t t e e
- Before formatting the flash memory, connect your yepp to PC
and click Refresh icon (
) on the yepp explorer.
- You can also format the flash memory by pressing the right
button on the mouse and selecting [Format].
- Formatting Flash memory will delete all existing files.
Formatting flash memory (Mac)
1
Execute the yepp explorer.
- Double-click the yepp explorer icon.
2
Click [File], [Format] and select [Flash Memory].
N N o o t t e e
- Before formatting the flash memory, connect your yepp to Mac
and click Refresh icon (
) on the yepp explorer.
- Formatting Flash memory will delete all existing files.
Options
To set the preferences, click the [Environment] and
[Options Ctrl+O] on the yepp explorer. To save the
changes, click [OK].
N N o o t t e e
For YP-20S/T, the USB driver must be correctly installed
for communication between the your yepp and PC.
Install the USB driver in the following sequence:
Select USB (setting option) -> Turn on the yepp -> Connect a
cable to the PC. Then the message of a new device checking
appears and simultaneously the USB driver is installed. If the
USB driver is not installed, even though you follow the above
instructions, contact your PC vendor or service center.
Click
7
Advertisement
Table of Contents
