Advertisement
Attaching the cradle to a mount:
1.
Attach a mount like the Gamber-Johnson 7160-1410 (shown below) to the cradle
with the 3/4" long #10 machine screws, split lock and flat washers from the
hardware bag supplied with the cradle. Leave the screws loose so the cable
restraint can be adjusted up and down.
2.
Adjust the cable restraint so it is lightly touching the USB-C power cable (suplied by
others) when inserted into the bottom of the TC22/TC27 handheld computer. The
cable should not bind with the cable restraint when inserting or removing the
computer from the cradle.
3.
Tighten the screws inserted in step 1 to hold the cradle with the cable restraint in
place on the end of the mount.
#10-32 hardware
cable restraint bracket
adjusts up and down to hold
the USB-C cable plugged into
the device
USB-C cable
supplied by others
7160-1410 shown
for reference
Advertisement
