Inquiry Command List (4/6) - Sony SRG-H40UH Command List

Inquiry Command List (4/6)

Number in ( ) is MENU display values.
Inquiry Command
FOCUS MODE
FOCUS POSITION
AF MODE
AF MODE INTERVAL
AF SENSITIVITY
NEAR LIMIT
IR CORRECTION
PAN TILT POSITION
STATUS
RAMP CURVE
PAN-TILT SLOW
PAN TILT LIMIT
PAN TILT MAX SPEED 8x 09 06 11 FF
Inquiry Packet Reply Packet
8x 09 04 38 FF y0 50 0p FF
8x 09 04 48 FF y0 50 0p 0p 0p 0p
FF
8x 09 04 57 FF y0 50 0p FF
8x 09 04 27 FF y0 50 0p 0p 0q 0q
FF
8x 09 04 58 FF y0 50 0p FF
8x 09 04 28 FF y0 50 0p 0p 0p 0p
FF
8x 09 04 11 FF y0 50 0p FF
8x 09 06 12 FF y0 50 0p 0p 0p 0p
0t 0t 0t 0t FF
8x 09 06 10 FF y0 50 pp pp FF
8x 09 06 31 FF y0 50 0p FF
8x 09 06 44 FF y0 50 0p FF
8x 09 06 07 0q FF y0 50 0p 0p 0p 0p
0t 0t 0t 0t FF
y0 50 pp qq FF
26
Comments
p: 2=Auto Focus, 3=Manual
Focus
pppp: Refer to the section of the
Focus Ratio and Focus Distance
(for reference) of VISCA
Command Setting Values
p: 0=Normal AF, 1=Interval AF,
2=Zoom Trigger AF
pp: AF operating time 00 (no
operation), 01 (1 second) - FF
(255 seconds)
qq: AF staying time 00 (no
suspension), 01 (1 second) - FF
(255 seconds)
p: 2 (Normal), 3 (Low)
pppp: Refer to the section of the
Focus Ratio and Focus Distance
(for reference) of VISCA
Command Setting Values
p: 0 (Standard), 1 (IR Light)
Refer to the section of the Pan/
Tilt Position of VISCA Command
Setting Values for pppp and tttt
pppp: Refer to the section of the
Pan/Tilt status code list
p: 1 =Sharpness
p: 2=On, 3=Off
q: Position (1=UpRight,
0=DownLeft)
Refer to the section of the Pan/
Tilt Position of VISCA Command
Setting Values for pppp and tttt
pp: Pan Max Speed fixed value
(18)
pp: Tilt Max Speed fixed value
(17)