Warning Symbols; General Safety Instructions - Qazqa Tak Fan Black Instruction Manual

Table of Contents

Advertisement

1. Warning symbols

2. General Safety Instructions

R
ead this instruction manual thoroughly before using the appliance and save it for future reference and if
necessary pass the instruction manual on to a third party.
WARNING: W
reduce the risk of fire, electrical shock and personal injury.
1) General
B
efore carrying out any work on the fan, disconnect it from the electrical supply!
C
heck if the electrical specifications of this appliance are compatible with your installation. The supplier accepts no
responsibility for any physical injury or material damage resulting from incorrect use or installation of this fan.
If you have the slightest doubt, please contact electrician.
U
nauthorized use and technical modifications to the appliance can lead to danger to life and health.
T
his appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
C
hildren should be supervised to ensure that they do not play with the appliance.
T
his appliance is for indoor use only.
M
eans for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
N
ever install the appliance in a moist or wet room.
B
e careful when working near the rotating blades. The fan should be installed at least a height of 2.3m
B
efore pushing the reversible slide switch, it is necessary to stop the action of the blades by turning off the fan
D
on't place your arm or other object in the path of the blades, when the fan is operating.
A
lways maintain the minimum distance between the lamp and any inflammable material
(curtains, wall etc), as indicated on the pictogram
M
eans for all poles disconnection having a contact separation that provide full disconnection under over voltage
category III conditions must be incorporated in the fixed wiring in accordance with national wiring rules.
Power supply wire from ceiling needs 1.5 sq mm wire
Regarding the method of the cable connection , how to assembly and the bulb type reference of a luminaire, thanks to
refer to the section "INSTALLATION"
Warning: Before obtaining access to terminals, all supply circuits must be disconnected.
"5. Appliance specification".
W
arning: Before obtaining access to terminals, all supply circuits must be disconnected.
R
C
hen using electrical appliance, basic safety precautions should always be followed to
ead the instructions
aution
L
amp
P.3

Advertisement

Table of Contents
loading

This manual is also suitable for:

102708

Table of Contents