Tcx1000-Ila Optical Specifications; Tcx1000-Ila Management Cable Specifications And Pinouts; Cable Specifications For Console And Management Connections For The Tcx1000-Ila - Juniper TCX1000 Hardware Manual

TCX1000-ILA Optical Specifications

Table 20: TCX1000-ILA Optical Specifications
Parameter Configurations
Input power range Loaded system (96 channels)
Single channel
Signal output power Loaded system (96 channels)
range
Single channel
Gain range (standard) Output gain tilt equal to 0 dB
Gain range (extended) Output gain tilt not equal to 0
See Also

TCX1000-ILA Management Cable Specifications and Pinouts

Cable Specifications for Console and Management Connections for the TCX1000-ILA

Table 21: Cable Specifications for Console and Management Connections for the TCX1000-ILA
Port on
TCX1000-ILA Cable Specification
Console ( ) port RS-232 (EIA-232) serial
CON
cable
Management Category 5 cable or
( MGMT ) port equivalent suitable for
1000BASE-T operation
Copyright © 2019, Juniper Networks, Inc.
Table 20 on page 39 provides the optical specifications for the TCX1000-ILA.
Overview of Installing the TCX1000-ILA on page 43
Cable Specifications for Console and Management Connections for the
TCX1000-ILA on page 39
Management Port Connector Pinouts for the TCX1000-ILA on page 40
Console Port Connector Pinouts for the TCX1000-ILA on page 40
Table 21 on page 39 lists the specifications for the cables that connect the TCX1000-ILA
to a management device.
Cable (Not Supplied)
One 7-foot (2.13-meter)-long
RJ-45 patch cable and RJ-45 to
DB-9 adapter
One 7-foot (2.13-meter)-long
RJ-45 patch cable
Chapter 2: Site Planning, Preparation, and Specifications
Minimum
–15.2 dBm
–35 dBm
10 dB
30 dB
Maximum Length
7 feet (2.13 meters)
328 feet
(100 meters)
Maximum
9.8 dBm
–10 dBm
19.8 dBm
0 dBm
30 dB
35 dB
Device
Receptacle
RJ-45
RJ-45
39