Table of Contents
Advertisement
4.8
Burner description
1
Air damper
2
Damper fixing screws
3
Pressure test point (-)
4
Cover fixing screw
5
Air pressure switch
6
Motor
7
Lock-out signal with reset button
8
Control box
9
6-pole socket for gas train
10 Capacitor
11 Gas train elbow
4.9
Burner equipment
Screws with nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
Insulating gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Cover fixing screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 3
Cable grommet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
7-pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 8
Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
20063692
Technical description of the burner
20065611
12 Flange
13 Pressure test point (+)
14 Combustion head
15 Electrode-probe
10
GB
The supplied grommet and the cover fixing screw
should be assembled on the same side as the gas
train.
WARNING
Check that it is possible to access the cover fixing
screws once the burner has been installed. If nec-
essary, replace them with the ones supplied as
standard.
Fig. 4
Advertisement
Table of Contents
