Makita HR2440F Technical Information page 14

W
iring diagram
Model HR2440 with reverse switch
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix brush holder's
lead wire (red) and
field lead wire (white)
with lead holder as per
the illustration.
* Do not slack brush holder's lead
wire (red) between brush holder and
lead holder.
Fix field brush holder's
lead wire (blue) and
field lead wire (black)
with lead holder as per
the illustration.
Fix lead wires which are passed
through this area, with any of
these lead holders.
LED circuit
LED
job-light
Fix lead wire (white) of
LED job-light with
lead holder as illustrated.
LED
job-light
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix noise suppressor's
lead wire (see-through)
with lead holder
as per the illustration.
Fix brush holder's
lead wire (blue) and
field lead wire (black)
with lead holder as per
the illustration.
* Pass brush holder's lead wire (blue)
under the field lead wire (black).
* Do not slack brush holder's lead
wire (blue) between brush holder and
lead holder.
Fix the following lead wires with this
lead holder.
* Brush holder's lead wire (red)
* 2 field's lead wires (black)
* Noise suppressor's lead wire (see-through)
Noise suppressor
Noise suppressor is not
used in some countries
LED circuit
Noise suppressor
LED lead wires
(blue or red)
Lead wires of power supply cord,
and grounding lead wire (see-through)
Pass LED lead wires, kead wires of power supply
cord and grounding lead wire as illustrated
above.
P 14 / 14
Bottom view
of handle portion