1- Safety Instructions; Intended Use; Pets; Electrical Safety - Beko INVDMMY User Manual

1
- Safety Instructions
•
This section contains safety instructions that will
help get protected against risks of personal injury or
property damage.
•
Our company shall not be responsible for damages
that may arise when these instructions are not
followed.
Installation and repair procedures must always be
performed by the manufacturer, authorised service agent
or a qualified person specified by the importer.
Only use original parts and accessories.
Original spare parts will be provided for 10 years,
following the product purchasing date.
Do not repair or replace any part of the product unless
specified expressly in the user manual.
Do not make any technical modifications to the product.

1.1 Intended Use

•
This product is not suitable for commercial use and
it must not be used out of its intended use.
This product is designed to be used in houses and
indoor places.
For example:
- Personnel kitchens in stores, offices and other
working environments,
- Farm houses,
- Areas used by customers at hotels, motels and
other types of accommodation,
- Bed&breakfast type hotels, boardinghouses,
- Catering and similar non-retail applications.
This product should not be used outdoors with or without
a tent above it such as boats, balconies or terraces. Do
not expose the product to rain, snow, sun or wind.
There is the risk of fire!
1.2 - Safety for children, vulnerable
persons and pets
•
This product can be used by children at and above 8
years old and by persons with limited physical, sen-
sory or mental capabilities or who lack experience
and knowledge provided that they are supervised or
trained on the safe use of the product and the risks
it brings out.
•
Children aged from 3 to 8 years are allowed to load
and unload refrigerating products.
•
Electrical products are dangerous for children and
pets. Children and pets must not play with, climb or
enter the product.
•
Cleaning and user maintenance should not be per-
formed by children unless they are supervised by
someone.
•
Keep packaging materials away from children. There
is the risk of injury and suffocation!
Refrigerator / User Manual
•
Before disposing of the old or obsolete product:
1.
Unplug the product by gripping from the plug.
2.
Cut the power cable and remove it from the appliance
together with its plug
3.
Do not remove the shelves or drawers so that it is harder
for children to enter the product.
4.
Remove the doors.
5.
Keep the product in a way that it will not tip over.
6.
Do not allow children play with the old product.
•
Never throw the product into fire for disposal. There
is the risk of explosion!
•
If there is a lock on the door of the product, the key
should be kept out of the reach of children.

1.3 - Electrical safety

•
The product must be unplugged during installation,
maintenance, cleaning, repairing and moving pro-
cedures.
•
If the power cable is damaged, it must be replaced
by a qualified person specified by the manufacturer,
authorised service agent or importer in order to avo-
id potential dangers.
•
Do not squeeze the power cable under or behind the
product. Do not place heavy objects on the power
cable. Power cable must not be bent excessively,
pinched or get in contact with any heat source.
•
Do not use extension cords, multi-sockets or adap-
ters to operate the product.
•
Portable multi-sockets or portable power sources
can overheat and cause fire. Therefore, do not keep
any multi-sockets behind or near the product.
•
Plug must be easily accessible. If this is not possib-
le, the electrical installation to which the product is
connected must contain a device (such as a fuse,
switch, circuit breaker, etc.) which conforms to the
electrical regulations and disconnects all poles from
the grid.
•
Do not touch the power plug with wet hands.
•
Remove the plug from the socket by gripping the
plug and not the cable.

1.4 - Transportation safety

•
Product is heavy; do not move it alone.
•
Do not hold its door when moving the product.
•
Pay attention not to damage the cooling system
or the piping during transportation. If the piping is
damaged, do not operate the product and call the
authorised service agent.

1.5 - Installation safety

•
Call the authorised service agent for installation of
the product. To make the product ready for use,
check the information in the user manual to make
sure that the electricity and water installations are
suitable. If they are not, call a qualified electrician
and plumber to have the necessary arrangements
3 /25 EN