Selecting The Sound Mode (Depending On The Model) - Samsung SP-42Q2 Owner's Instructions Manual

Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "DUAL I " or "STEREO", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
STEREO
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual I/II
STEREO
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
◆ When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
(depending on the model)
On-screen indication
MONO (Normal use)
NICAM ↔ MONO
MONO (Normal)
NICAM ↔ MONO
STEREO (Normal)
NICAM → NICAM → MONO
DUAL I DUAL II (Normal)
MONO (Normal use)
DUAL I ↔ DUAL II
STEREO ↔
MONO
(Forced mono)
39
ENG