Embedded Infrared Overlay Touch Screen - Kimex 160-4075T User Manual

Embedded Infrared Overlay Touch Screen

Infrared Overlay Touch Screen adds touch screen feature to your Display. The Touch Screen is connected
internally to the Display. If you switch the Display's source to the embedded OPS (if available), touch screen
feature can be used with the OPS. It can also be used with external source devices. In this case the external
source device should be connected to the Display via a USB (type-B) to USB (type-A) cable. Connect the USB
Type-B end of the USB to USB cable to the USB Type-B port of the Display and the USB Type-A end to the
external source device as shown in the example connection below. Touch screen will become functional after
a short period of time. The Touch Screen can also be used with the Internet Browser (if available) which can
be launched from the Displays menu.
The Touch Screen is HID compliant. Windows, Linux, Mac and Android operating systems support HIDs. But
in some cases a driver/patch may be required in order to use the touch screen with an external source device.
In this case, the required driver/patch should be installed onto the external source device. Otherwise the Touch
Screen may not work properly. Refer to the user manual of the source device for further information.
If the operating system of the source device does not recognise the touch screen after the connection has
been established (a message may appear on the screen of the source device stating that the USB device is
not recognised), disable and then re-enable the touch screen by pressing the dedicated button on the front
side of the Display. Refer to Control Buttons on the Display section if you need further information on the
buttons on the Display and their functions.
Touch screen controls the currently displayed image on the screen of the Display. If an embedded OPS is being
used the touch screen controls the embedded OPS. If an external source device is connected via HDMI, VGA,
DP (*) or USB Type-C (*) and the source is selected accordingly, then the connected device will be controlled.
(*) Availability depends on the model
Example Connection (External PC)
1. Front side of the Display
2. USB Type-B
3.
HDMI In
In the undermentioned circumstances the coordinates of the Touch Screen and Display's screen may need to
be accurately matched by calibration.
• After the first time you have installed the touch screen driver software or patch.
• If inconsistency is occurred between the mouse and your finger action.
• After replacing the Touch Screen or Display.
• If the resolution of the Display is changed.
Note: If any driver/patch is missing or you require technical support, please contact your retailer.
English - 10 -