Kimex 160-4075T User Manual page 106

GETSCHEDULEOP
STARTFTI
Command
SETSTARTUPSOURCE
GETSTARTUPSOURCE
SETSTARTUPMODE
GETSTARTUPMODE
SETPANELLOCK
GETPANELLOCK
SETMAXVOLUME
gets scheduler
parameters
start first time installation
MODE COMMANDS
Description
Sets startup source
which has been entered
after power off on
Gets startup source
which has been entered
after power off on
Set start up mode
Get startup mode
Set Panel lock availability
(ON,OFF)
Get panel lock availability
Set volume maximum
level
English - 38 -
"GETSCHEDULEOP N"
(N is scheduler number)
N=1, 2, 3, 4
-----------------------------
-------
GETSCHEDULEOP 1"
no parameter
Parameter
integer n (1 ≤ n ≤ 7)
Source Index
(n=1) DP
(n=2) SLOT/OPS
(n=3) TYPE C
(n=4) HDMI1
(n=5) HDMI2
(n=6) HDMI3
(n=7) HDMI4
no parameter
integer n (0 ≤ n ≤ 2) (n
= 0 => On, n = 1 =>
Standby, n = 2 => Last)
no parameter
string n (ON, OFF)
no parameter
integer n (0 ≤ n ≤ 100)
#*Scheduler Plan N
(1,2,3,4) on/off time,
source and days are: ......
(hh:mm_hh:mm_source_
days)
or
#*Scheduler Plan N
(1,2,3,4) on/off time,
backlight and days are:
...... (hh:mm_hh:mm_
backlight_days)
or
#*Scheduler Plan N
(1,2,3,4) is not set
or
#*Wrong parameter
entered
Return
#* The startup source is
set to ...
or
#* Invalid startup source is
entered.
#*The startup source is ...
#*The startup mode is ...
or
#*Invalid startup mode
entered.
#*The startup mode is ...
#*Set panel lock to ...
or
#*Invalid panel lock
parameter
#*The panel lock is ...
or
#*Panel lock has not been
set yet.
#* Maximum volume limit
is set to ...
or
#* Invalid volume
parameter!