Advertisement
1. Symptoms and Causes
a) Symptoms : Frost on the Freezer Guide, Rail
b) Causes : Plate Assy. C & Gasket Assembly Door not sealing well
2. Repair Instruction
▣ SVC method
-. Disassemble the plate assembly center ,and the Cover Assembly Front
then
replace the Part 251B,if
Cover Assembly Front(251A).
-. Disassemble the F/U & F/L Gasket Assembly Door, then replace the part 203A & 203B
There are improvements in the two parts.
-.Disassemble the FU & FL Door , then replace the part 201A & 201B
※ Detail SVC Guide please refer to page 6~page9
• The information is available through "https://gsfs-america.lge.com" with a valid ID.
• The information is intended for experienced technicians, not for customer .
• The information is subject to change or update without notice.
<Repair information>
Cover Assembly Front is broken after disassemble, use a new
②
Cover Assembly Front
①
Plate Assembly Center
Service Bulletin
Product
Majesty 4D
:
Bulletin # : CNZ201800037
Release Date : 2017.11.01
Remark:
When Installing the new parts,
install the plate assembly, center, first,
then Install the cover assembly front.
35
Advertisement
