Advertisement
SVC guide for replace sheath heater
1.Remove Freezer door (Use screw driver to push
in the hook at both sides of case inner ) and then
remove the guide rail.
4. Disconnect housing
7. Use sharp pliers to cut off the
bracket at right-side bottom position
Cut the Middle
position of bracket
2. Use pliers to pull out the
Grille Fan shown in the figure.
5.Separate the EVA hook from the
inner case ( Each side has a hook ）
8. Take the sheath heater out of the hole at the left-
side bottom position
3. Disconnect housing in the back (3EA),pull the
cover out
6. Cut off 3 ties as shown by knife and then
throw it
9. Release the middle hook , remove sheath
heater from Evaporator assembly
26
Advertisement
