Advertisement
Quick Start
How to read 1D/2D barcode with EM3000 Embedded Barcode Reading Engine
When the trigger line (Pin 12 on the flexible cable) is pull low for 10ms, the
engine starts a read. For the optimum reading stance, aiming pattern width should
be 1mm or 2mm less than barcode width.
Focus the green aiming bar on the central of a barcode. The distance of scan
window & barcode between 2cm and 50cm,15mm~25mm is the best distance
between scan window and barcode. Yaw (αas below) between 0°and 45°(0 is
the best); Pitch (γas below) between 0°and 45°(5-20 is the best); Roll (β as
below)360°.
For more information about EM3000 reading engine, please visit Newland Auto-
ID website. www.nlscan.com
nlscan.com
Page 4
Advertisement
