Table of Contents
Advertisement
Welcome to Your EnviroMonitor System
An EnviroMonitor System includes
a Gateway and a number of Nodes,
each with up to four sensors that
form an advanced mesh network
operating at 902 - 928 MHz (868
MHz in the EU). The Nodes
transmit the sensor data to a "mesh
parent," either the Gateway or
another Node. The Gateway then
sends the data via Ethernet
connection to WeatherLink.com.
EnviroMonitor can be customized
for different sized installations.
Each Gateway can have up to 32
Nodes. Additional Gateways can be
added to your account to receive
data from another set of Nodes.
A Davis wireless or cabled
GroWeather Sensor Suite can also
be plugged into the Gateway.
This manual will show you how to
set up both the EnviroMonitor
Gateway and Nodes. If you are just
installing a Node and have already
installed the Gateway, you can skip
to page 9: Set Up Nodes and
Sensors.
Note:
Your IP Gateway is designed to be installed either indoors or in a Davis Universal
Shelter, product number 6618.
The steps for setting up your EnviroMonitor system:
1. Plan: What sensors do you need and where? Decide where you will install the
Gateway and Nodes. See page 2: Planning Your System.
2. Power up your Gateway. See page 6: Power-up and Connect your Gateway.
3. Connect your Gateway to WeatherLink.com with the EnviroMonitor app.
4. Power up the Node. See page 10: Power-up and Connect the Node.
5. Connect the Node to the Gateway with the EnviroMonitor app.
6. Mount the Node. See page 13: Mount the Node.
7. Add and Install the sensors with the EnviroMonitor app.
WeatherLink.com
1 Gateway
Up to 32
Nodes
Gateway
0-4 Sensors
per Node
Wireless or cabled
GroWeather ISS
(optional)
per
1
Advertisement
Table of Contents
