Table of Contents
Advertisement
Using an external antenna with the IP Gateway
Note:
If you are using your IP Gateway in a Universal Shelter, remove the solid grommet
from one of the holes in the base of the shelter. Run the antenna cable up through
this hole. Use the split grommet with a round hole that was included with the
antenna to seal the hole. Then follow the steps below.
1. Screw the antenna cable into the connector on the side of the IP Gateway.
2. Use the EnviroMonitor app on your smartphone to set up the antenna:
In the app, navigate to this Gateway.
Tip:
You will know you
are on the right
screen when the
word Gateway at the
top of the screen is
underscored:
3. Click the menu icon
4. Click "About."
5. Click: "Antenna: Internal."
6. Choose "External."
7. Click Save.
18
External Antenna
Connector
Cherries IP Gateway
in the upper right corner.
Advertisement
Table of Contents
