Table of Contents
Advertisement
Quick Links
048
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
OPERATION MANUAL
BUILT-IN DRAWER WARMERS
with SOLID STATE CONTROLLER
MODELS
RWT-16HD thru RWT-36HD
RWNT-16 thru RWNT-36 Narrow
Includes
INSTALLATION and USE & CARE
Model RWNT-26
Model RWT-26HD
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
307539
09
p/n 2M-
Rev. (A)
M048
1221
Advertisement
Table of Contents
Related Manuals for Wells RWT-16HD
Summary of Contents for Wells RWT-16HD
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
-
Page 2: Limited Warranty Statement
Seller’s obligation under this warranty is limited to the repair manufactured by Wells Manufacturing is warranted against of defects without charge by a Wells Manufacturing factory defects in materials and workmanship for a period of one year authorized service agency or one of its sub-service agencies. -
Page 3: Specifications
PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Manufacturing appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. -
Page 4: Features & Operating Controls
FEATURES & OPERATING CONTROLS 2T-307490: Control Temp 120V, RTW 2T-307491: Control Temp 208/240V, RTW WS-61816: Probe Thermocouple Assembly CONTROL MODULE ºF OR ºC LED READOUT INDICATORS "PROCESS" KEY LOAD PROCESS INDICATOR HUMITROL INCREMENT AND RACK DECREMENT KEYS DRAWER INSERT PAN AIR VENT CONTROL POWER SWITCH... -
Page 5: Precautions And General Information
PRECAUTIONS AND GENERAL INFORMATION This appliance is intended for use in commercial establishments WARNING: only. ELECTRIC SHOCK HAZARD This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its All servicing requiring agents. -
Page 6: Installation
INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for Appliance before connecting electrical power or otherwise performing hidden damage and tested it any installation procedure. - Page 7 INSTALLATION (continued) Reinstall drawer(s) in unit: CAUTION: a. Check the roller catch inside the cabinet. The spring-loaded RISK OF roller arm must be extended. DAMAGE b. With the front of the drawer assembly tipped downward, engage the roller on the drawer with the cabinet drawer slide. DO NOT connect or energize Raise the drawer to the horizontal position until the drawer- this appliance until all...
-
Page 8: Operation
OPERATION CONTROL MODULE ºF or ºC Indicator: 4 Character LED Display: Lit to indicate if unit shows SETPOINT is configured for temperature degrees Fahrenheit or ºF degrees Celsius ºC LOAD Process Key: Load Indicator: Press to view Lit when output PROCESS actual temperature is energized... -
Page 9: Normal Operation
OPERATION (continued) SET HEATING TEMPERATURE SET SETPOINT TEMPERATURE: Press an arrow key: ºF UP arrow to increase ºC DOWN arrow to decrease LOAD Release key when desired setpoint temperature is displayed PROCESS Reading is locked into memory 3 seconds after last key stroke IL1934, Rev.-, M048 NORMAL OPERATION •... -
Page 10: Heating Options
NOTE: The chart below is intended 2. Moist heat with pans: as a guide ONLY. Your a. This Wells warmer is designed to accommodate any own experience with this combination of standard-size, steam table pans. appliance, type of foods b. Place a small amount of water in drawer pan. Place the steam and method of operation will table pans in the drawer pan. -
Page 11: Do's And Don'ts
OPERATION (continued) OPERATION CAUTION: HOT SURFACE 1. Determine the type of food to be warmed. 2. Refer to the chart on page 8 to determine the type of heat required. Exposed surfaces can be hot to 3. Press power switch to ON. Set the air vent control for the type of the touch and may cause burns. -
Page 12: Cleaning Instructions
CLEANING INSTRUCTIONS PRECAUTIONS: Press power switch OFF. CAUTION: Allow drawers to cool before proceeding. SHOCK HAZARD Remove drawer pans and Humitrol racks. Disconnect appliance from FREQUENCY: Minimum -Daily electric power before cleaning. TOOLS: Warm water and mild detergent Clean cloth or sponge CAUTION: HOT SURFACE 1. -
Page 13: Troubleshooting Suggestions
Warmer unplugged Plug warmer into appropriate receptacle Circuit breaker off or tripped Reset circuit breaker No lights or heat (all drawers) Contact an Authorized Wells Service Agency Internal damage for repairs. Temperature control not set Set for desired temperature. No heat (one drawer) -
Page 14: Maintenance Instructions
MAINTENANCE INSTRUCTIONS ADJUSTMENTS AND LUBRICATION CAUTION: SHOCK HAZARD PRECAUTIONS: Turn control knob to OFF. Unplug warmer Allow drawers to cool before proceeding. Disconnect appliance from Remove drawer pans and Humitrol racks electric power before cleaning. FREQUENCY: Minimum - monthly. Every 2 weeks recommended. -
Page 15: Parts And Service
C8-46840 PAN, STAINLESS (RWN ONLY) C8-49252 For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing 10 Sunnen Drive St. Louis, MO 63143 Service Parts Dept. phone: (314) 678-6314... - Page 16 WELLS MANUFACTURING 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.com...