Table of Contents
Advertisement
Wi-Fi
Connectivity
The Breville Smart Air Plus
can offer remote operation by using a home
Wi-Fi connection and the Breville Home
Connect™ app downloaded to a compatible
mobile phone through the Google Play store or
Apple App store.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is
compatible with mobile phones running
Android
5.0 or later and iOS devices 9.0
®
or later.
NOTE
To control the purifier using the app, the
purifier must be plugged into an active power
outlet and switched on at the power outlet.
If the purifier is turned OFF or disconnected
from the power outlet, then the app cannot
connect to the purifier via the network.
Connect Purifier
TM
CONNECT YOUR PURIFIER TO WI-FI
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. To set up the purifier, turn the purifier on
at the power outlet. The purifier must be
turned on via the control panel. Press and
hold the
button for 5 seconds, until the
symbol light is flashing rapidly. The
purifier is now ready to connect.
3. Log into your Breville Home Connect ™
app account and stay on the "Home" page.
To add the purifier to the list, touch 'Add
Device' or the
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the purifier
will appear in the main page of the app and
the
symbol light on the purifier will
illuminate.
symbol found in the top
11
Advertisement
Table of Contents
