Table of Contents
Advertisement
Use
Control panel
1 Detergent dispenser drawer
2 Spin speed selector dial
This dial allows you to select the spin speed or the
following options:
= no spin. All the spinning phases are
suppressed. To be used for items that tend to
wrinkle. If selected on programmes A and B the
machine will perform an extra rinse (4 instead of 3).
= anti-crease (water in tub). The water of the
last rinse is not emptied out to avoid any creasing
in the laundry.
The spin speeds on the dial refer to cottons.
For delicates, position 800 or 1000 corresponds to
650 rpm, for synthetics and wool to 850 rpm (800
rpm for model F 832). Position 450 corresponds to
450 rpm for synthetics and wool and 350 rpm for
delicates.
3 Mains on light
This light comes on when the ON/OFF button is
pressed, and goes out when it is pressed again.
4 ON/OFF button
By depressing this button the machine is switched
on. By depressing it again the machine is switched
off.
5 Half load button
Select this button to reduce water consumption on
the rinse cycle when washing a half load of cottons
or linens.
All manuals and user guides at all-guides.com
10
6 Temperature selector dial
Turn this dial to select the washing temperature.
Position
= cold wash.
7 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
Before selecting a programme or changing a
programme in progress the machine must be
switched off by depressing ON/OFF button.
Advertisement
Table of Contents
