Safety - Gravely ZT 2044 XLP Owner's/Operator's Manual

5. Explain recommended lubrication and maintenance.
Advise customer on adjustments. Instruct customer on
controls and operation of unit. Discuss and emphasize the
Safety Precautions. Give customer Owner/Operator, Parts,
and Engine Manuals. Advise customer to thoroughly read
and understand them.
WARNING: This cutting machine is capable of
amputating hands and feet and throwing objects.
Failure to observe the safety instructions in the
manuals and on decals could result in serious injury or
death.
Slopes are a major factor related to loss-of-control and
tip-over accidents. Operation on all slopes requires
extra caution.
Tragic accidents can occur if the operator is not alert to
the presence of children. Never assume that children
will remain where you last saw them.
Gasoline is extremely flammable and the vapors are
explosive, handle with care.
Disengage attachment, stop unit and engine, remove
key, engage parking brake, and allow moving parts to
stop before leaving operator's position.
SAFETY ALERT SYMBOL
These are safety alert symbols. They mean:
•ATTENTION!
•YOUR SAFETY IS INVOLVED!
When you see this symbol:
OL1253
•BECOME ALERT!
•OBEY THE MESSAGE!
OL3900
Customer Note: Your Dealer has been provided complete set-up
and preparation instructions which must be completed prior to
you taking delivery of this unit. The dealer is required to review
important information in this manual with you before or upon
delivery of the unit or attachment.

SAFETY

SIGNAL WORDS
The safety alert symbols above and signal words below are used
on decals and in this manual.
Read and understand all safety messages.
DANGER: IMMINENTLY HAZARDOUS SITUATION! If
not avoided, WILL RESULT in death or serious injury.
WARNING: POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD RESULT in death
or serious injury.
CAUTION: POTENTIALLY HAZARDOUS SITUATION!
If not avoided, MAY RESULT in minor or moderate
injury. It may also be used to alert against unsafe
practices.
NOTATIONS
NOTE: General reference information for proper operation and
maintenance practices.
IMPORTANT: Specific procedures or information required to
prevent damage to unit or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working precautions, for the
benefit of yourself and others. Understand and follow all safety
messages. Be alert to unsafe conditions and the possibility of
minor, moderate, or serious injury or death. Learn applicable
rules and laws in your area, including those that may restrict the
age of the operator.
REQUIRED OPERATOR TRAINING
Original purchaser of this unit was instructed by the seller on safe
and proper operation. If unit is to be used by someone other than
original purchaser (loaned, rented or sold), ALWAYS provide this
manual and any needed safety training before operation.
GB-3