Flashlight Operation - PetSpy T500 User Manual

❼Light flicker function level adjustment operation:
CH1
Mode 1
CH1
CH
Mode 2
Light trigger
CH1
Mode 3

❽Flashlight operation:

Blue light flashing
The blue/red light flashes alternately
Purple light flashing
Flashlight button
-11-
❾Friendly Tips:
1.The liquid volume of the gas replenished : the
main machine must be turned off before
replenishing the gas， and after replenishing,the
receiver;can be startde Aligh the aer ation tank to
the device,with the gaspin perpendicularly fixed,
and press and hold the aeration tank into the gas
adding hole for 10 seconds.
2.Wear a bark stopper for the dog: adjust the
neckband according to the size of the dog's
neck, Cut the remaining part of the neckband
and use it effectively when wearing it correctly
premise.
3.Put the bark stopper on the dog's neck and
install it with the spray nozzle aligned vertically
Pet nose, wearing a scale to fit between the
neckband and the dog's neck One finger is the
standard, which can accurately detect the
frequency of barking of dogs.The installation is
very important, too much slack will cause
uncoordinated movements,Affect the normal
operation of the product.
4.For dogs with long body hair, it is necessary
to trim the hair on the spray path, Ensure that
the mist can be sprayed to an effective range.
-12-