Subscribe to Our Youtube Channel
Related Manuals for RJG RIEGER LS-QTTB-J
Summary of Contents for RJG RIEGER LS-QTTB-J
- Page 1 PRODUCT MANUAL PRODUCT MANUAL Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K Training and Technology for Injection Molding...
- Page 2 PRINT DATE 06.13.2022 REVISION NO.
-
Page 3: Table Of Contents
Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K PRODUCT DESCRIPTION APPLICATIONS OPERATION INSTALLATION INSTALLATION OVERVIEW INSTALLATION SPECIFICATIONS MOUNTING CONNECTIONS SOFTWARE SETUP MAINTENANCE CLEANING TESTING & CALIBRATION WARRANTY RJG, INC. STANDARD WARRANTY PRODUCT DISCLAIMER Product Manual | Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K... - Page 4 PRODUCT MANUAL Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K TROUBLESHOOTING MEASUREMENT ERRORS CONNECTION PROBLEMS WIRE EXTENSIONS NOISE INSTALLATION ERRORS REVERSED CONNECTIONS LOOSE CONNECTIONS CUSTOMER SUPPORT RELATED PRODUCTS COMPATIBLE PRODUCTS SPRING‑LOADED 1.5 MM TEMPERATURE SENSOR TS‑SL01.5‑K PRESS‑FIT 3 MM CAVITY TEMPERATURE SENSOR TS‑PF03‑K 1 MM FLUSH MOUNT CAVITY TEMPERATURE SENSOR TS‑FM01‑K Lynx™...
- Page 5 This guide must be kept available for reference at all times. DISCLAIMER PRIVACY Inasmuch as RJG, Inc. has no control Designed and developed by RJG, Inc. over the use to which others may put Manual design, format and structure this material, it does not guarantee that copyright 2022 RJG, Inc.
- Page 6 NOTES Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K | Product Manual...
-
Page 7: Product Description
PRODUCT DESCRIPTION The Lynx™ Quad Temperature Modules LS‑QTTB‑J and LS‑QTTB‑K accept input from up to four thermocouples (type J or type K) for use with the RJG, Inc. eDART® or CoPilot® systems. APPLICATIONS A calibration factor is used to compute... -
Page 8: Operation
LS‑QTTB‑K is compatible with locations include nozzle, front, center, feed throat, and rear. type K thermocouples; RJG, Inc. offers a line of type K thermocouples. The 3. Dryer Temperature Monitoring LS‑QTTB‑J/K modules feature terminal A sensor or sensors can be placed in the block connectors and accepts input from a dryer and connected to the LS‑QTTB‑J/K... -
Page 9: Installation
INSTALLATION INSTALLATION OVERVIEW The LS‑QTTB‑J/K is grounded and mounted over the area where the thermocouple wires exit the mold, but away from extensive heat or vibration/shock. The thermocouple wires are inserted into the module and installed using the terminal block. A Lynx cable is attached to the LS‑QTTB‑J/K Lynx port and the eDART or CoPilot system. -
Page 10: Installation Specifications
INSTALLATION SPECIFICATIONS Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K | Product Manual... -
Page 11: Mounting
INSTALLATION SPECIFICATIONS (continued) MOUNTING 3. Remove cover. 1. Requirements • Remove screws ( ) from LS‑QTTB‑K, then The Lynx quad temperature module must remove cover plate. be mounted on a frame‑grounded structure to ensure proper operation. The ground 4. Insert thermocouple wire. potential of the structure must be same as the ground required for the eDART or Feed thermocouple wire (... -
Page 12: Connections
INSTALLATION SPECIFICATIONS (continued) CONNECTIONS 1. Requirements 3. Connect negative (‑) lead. The thermocouple wires must be shielded, • Connect white wire ( ) to the negative however, wires that remain within the mold terminal. may not be shielded. The shielded wires 4. -
Page 13: Software Setup
The LS‑QTTB‑J/K requires eDART software previously been configured, all four version 8.0 or eDART software version channels will be assigned as “Mold 10.xx or later; contact RJG Customer temperature” with no Sensor Location Support if a software upgrade is required. assigned. - Page 14 INSTALLATION SPECIFICATIONS (continued) 3. Software Setup Version 10.xx The LS‑QTTB‑J/K and associated sensor list into the Other Sensors machine may be set up during the Machine Setup/ location listed on the left to designate Inputs or Mold Setup/Inputs in the the sensor type;...
- Page 15 INSTALLATION SPECIFICATIONS (continued) MOLD INPUT SETUP • Click, drag, and drop the associated • For mold sensors , runner, surface, sensor from the Available Sensors parting line, sprue, or coolant list into the Mold Sensors machine temperature can be selected; for cavity location or the desired cavity listed on types...
- Page 16 NOTES Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K | Product Manual...
-
Page 17: Maintenance
MAINTENANCE PRODUCT DISCLAIMER CLEANING Keep sensor pocket, cable channel, and RJG, Inc. is not responsible for the sensor components free from oil, dirt, improper installation of this equipment, or grime, and grease. any other equipment RJG manufactures. TESTING & CALIBRATION... - Page 18 NOTES Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K | Product Manual...
-
Page 19: Troubleshooting
TROUBLESHOOTING MEASUREMENT ERRORS Errors in measurement can result from connection problems, lead resistance issues, or electrical noise. CONNECTION PROBLEMS Connections must be clean and free from oil, dirt, grime, and grease. If shielded wire is used, the wire must run under the LS‑QTTB‑J/K shield plate ( & ... -
Page 20: Installation Errors
INSTALLATION ERRORS REVERSED CONNECTIONS Connections must not be reversed ( & at right . Reversed leads will provide a reading which will vary in the opposite direction relative to ambient temperature. LOOSE CONNECTIONS Ensure connections are firmly in place, but are no over‑tightened. -
Page 21: Customer Support
CUSTOMER SUPPORT Contact RJG’s Customer Support team by phone or email. RJG, Inc. Customer Support P: 800.472.0566 (Toll Free) P: +1.231.933.8170 www.rjginc.com/support Product Manual | Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K... - Page 22 NOTES Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K | Product Manual...
-
Page 23: Related Products
RELATED PRODUCTS COMPATIBLE PRODUCTS The LS‑QTTB‑J/K temperature sensor is compatible with other RJG, Inc. products for use with the eDART or CoPilot process control and monitoring systems. The LS‑QTTB‑K is compatible with the following RJG, Inc. temperature sensors. SPRING‑LOADED 1.5 MM TEMPERATURE SENSOR TS‑SL01.5‑K... - Page 24 NOTES Lynx™ Quad Temperature Modules LS‑QTTB‑J & LS‑QTTB‑K | Product Manual...
- Page 26 P +39 335 178 4035 P +01 231 947‑3111 sales@it.rjginc.com F +01 231 947‑6403 it.rjginc.com sales@rjginc.com www.rjginc.com MEXICO RJG MEXICO SINGAPORE RJG (S.E.A.) PTE LTD Chihuahua, Mexico Singapore, Republic of P +52 614 4242281 Singapore sales@es.rjginc.com P +65 6846 1518 es.rjginc.com sales@swg.rjginc.com en.rjginc.com...
Need help?
Do you have a question about the RIEGER LS-QTTB-J and is the answer not in the manual?
Questions and answers