Husqvarna TrioBrake 550XPG Workshop Manual page 37

3
Dismantle the air filter, the filter holder, the cable
from the intake flange holder and the carburettor
and the throttle cable as outlined in "Dismantling
the carburettor".
4
Hook off the cabling H from the holder on the
intake system. See figure 25a. Knock out the
POP-out window using a screwdriver. See figure
25b. Lower the tank slightly and slide the fuel hose
down into the hole. Loosen the lower screws of the
intake system using the POP-out hole and the fuel
hose hole. Loosen the other screws.
F
Fig 24
H
Fig 25a
Repair Instructions
G
37
English -