Parts Diagram - Salton STS80 Instructions And Warranty

39. In case of technical problems, turn off and unplug the hot tray and do not attempt to
repair it yourself. Return the appliance to an authorised service facility for
examination, adjustment or repair. Always insist on the use of original spare parts.
Failure to comply with the above mentioned pre-cautions and instructions, could
affect the safe operation of this appliance.

PARTS DIAGRAM

A- Feet
B- Temperature control knob
C- On/off switch
D- Glass heating surface
OPERATING INSTRUCTIONS
1. Before first use unpack and remove all parts and packaging material from the carton.
2. Do not plug the power cord into the outlet before reading these instructions.
3. Ensure the temperature control knob is set to „0‟ before plugging the appliance into
the wall outlet.
4. Once ready to use, the temperature control knob must be turned clockwise to set the
desired temperature. If the temperature control knob is turned fully clockwise the hot
tray will be set to the maximum temperature of 125°C.
5. The indicator light should come on.
6. To lower the temperature turn the control knob anti-clockwise.