When connecting, pay attention to the limiting position, and do not wrongly insert it. When tightening,
do not use excessive force (torque: 1.5~2.0N•m), so as not to damage the interface.
⚫
The GPRS do not need to be set.
⚫
For the use of WIFI and GPRS, please scan the QR code on the WIFI/GPRS.
3.6.8 RS485 port Communication Connection
Step 4
Plug RS485 communication wire into the RS485 port on the communication board, as shown in
Figure2-12. Connect the other end to the monitoring platform.
Figure2-12 RS485 connection
IV438E REV.01 Issued: 2022/11/09
User Manual Soleil SRT/SPX 75K-150K
Pag. 52 of 74 +FR