Table of Contents
Advertisement
Viewing the Picture-in-Picture
Selecting the PIP Screen
Press the Menu button. Move the joystick up or down to
1
select the "PIP", then press the joystick to enter.
!
Quick way to access the PIP: Just press "PIP"
on the remote control.
Move the joystick left or right to select the "On".
2
The PIP image will appear in the corner of the screen.
Press the Menu button to exit.
3
Note
• The PIP function operates in only PC mode or Component2 mode.
28
PIP
Select
Off
Move
Enter
Exit
PIP
Select
On
Locate
Source
Move
Adjust
Exit
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
Press the Menu button. Move the joystick up or
1
down to select the "PIP", then press the joystick to
enter.
!
Quick way to access the PIP source: Just press
"Source" in the cover on the remote control.
Move the joystick up or down to select the
2
"Source", then move the joystick left or right to
enter.
Move the joystick up or down to select an external
3
signal, then move the joystick left or right.
The signal from these inputs will not appear if you
have not connected any equipment to the PDP's
input jacks.
Press the Menu button to exit.
4
PIP
Select
On
Locate
Source
Move
Adjust
Exit
PIP
Select
On
Locate
Source
Move
Adjust
Exit
PIP
VIDEO
S-VIDEO
COMPONENT 1
Move
Exit
29
Advertisement
Table of Contents
