LENCO LS-55 UK Manual page 8

UNPACKING AND SETUP
1. Carefully remove the turntable from the display package and remove all packing
material.
2. Unwind the AC adapter power cord and extend it to its full length.
3. Place the turntable on a stable, level surface in proximity to an AC outlet and away from
any strong magnetic fields.
4. Plug the power cord into your AC outlet.
5. Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in
the direction of the arrow.
6. Be cautious and gentle when removing this stylus cover, as damage to the stylus is not
covered by warranty.
7. Remove the twist-tie securing the tone arm during the shipment.
8. Release the tone arm lever lock.
IMPORTANT!
TRANSPORTING THE SYSTEM
1. To protect the turntable from damage during transportation, a silver transit screw is
located on the upper right of the turntable platform.
2. Before playing, please use a screwdriver to turn the transit screw in a clockwise
direction (screw going down) completely to unlock the turntable.
3. To lock the turntable again for transportation, please turn screw in a counter-clockwise
direction.
LOCK for transportation
UNLOCK for playing
8