LENCO LS-55 UK Manual page 13

CARE AND MAINTENANCE
TO REPLACE THE CARTRIDGE FROM THE TONE ARM PLEASE FOLLOW THE INSTRUCTIONS
BELOW.
1. Gently lift off the tone arm from the tone arm lock.
2. Use your left hand to hold the tone arm and your right hand to hold the rear portion of
the cartridge. Then push the cartridge backwards and downwards according to the
direction as shown to separate the cartridge from the tone arm.
3. Using either a tweezer or your fingers, carefully unplug the terminals to the new
cartridge.
4. Carefully connect the terminals to the new cartridge (not included).
5. To re-install the new cartridge to the tone arm, first lock the front end of the new
cartridge on the hook of the tone arm.
6. Press the rear side of the new cartridge upwards to lock it on the tone arm.
HOOK
CAUTION:
Please do not damage the stylus when installing the new cartridge.
WHITE WIRE
NEW CARTRIDGE
13
RED WIRE
BLACK WIRE
LOCKER
PRESS UPWARDS TO
LOCK