Connecting Speakers; Connecting A Vcr/Cable Box - Akai PDP4290 Owner's Instructions Manual

Connecting Speakers

Speaker Audio Cable Speaker Audio Cable
External speakers MUST have a power handling capability of 7 watts minimum(impedance 8ohm).
How to Connect
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP,
matching the "+" and "-" ends of the cable with the diagram on the PDP.
Connecting PDP and Speakers / Stand and Speakers
1 Fix the bracket onto the guide pole located on the rear
of speaker and fasten the screws.
2
After removing the three screws on the PDP, clamp
thespeaker and the PDP together and fasten the screws.
Guide
pole
Guide
pole
22
• Connecting Speakers to Stands.
Guide
pole

Connecting a VCR/Cable Box

Power Plug
Audio Cable
S-Video Cable
Video Cable
How to Connect
1 Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable
box and the Video Input jack on the PDP.
• For better video, use an S-Video cable.
2 Connect an Audio cable between the Audio Output jacks on the VCR/Cable box and the
Audio Input jacks (Video) on the PDP.
Videotape Playback:
1. Turn on PDP and press the Video or S-Video(if S-Video jack is connected.) button on your
remote control.
2. Turn on your VCR, insert a videotape and press the Play button.
23