Selecting a Channel Numbered Ten or Over
When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1
Press the -/-- button.
Result:
The "--" symbol is displayed.
2
Enter the two-digit channel number.
Example: To select channel 42, press 4, followed by 2.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
◆ Custom, Standard, Sports, Natural, Mild.
1
Press the MENU (
Result:
The Picture menu is displayed.
2
Press the œ or √ button.
Result:
The Mode menu is selected.
3
Select to satisfy your preference by pressing the œ or √ button.
4
When you have been finished, press the EXIT (
press the MENU (
viewing.
➣
You can select the required picture effect by simply
pressing the "P.MODE" (Picture Mode) button on the
remote control.
) button.
) button repeatedly to return to normal
Select
) button or,
Picture
œ œ
√
Mode
Custom
√
Adjust
Digital NR
: Off
Tilt
: 0
Adjust
Exit
21
ENG