Switching Your Television On and Off
The mains lead is attached to the rear of the television.
☛
If you have purchased this television in the United
Kingdom, refer to page 38 for further instructions on
plug wiring.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2
Press the "
" (ON/OFF) button on the front of the television.
Result:
The Standby indicator lights up on the front panel.
3
Press the POWER (
television on.
Result:
The programme that you were watching last is re-
selected automatically.
4
To switch your television off, press the "
on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1
Press the POWER (
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up.
2
To switch the screen back on, simply press the POWER (
again on the remote control.
➣
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
) button on the remote control to switch the
" (ON/OFF) button again
) button on the remote control.
) button
ENG
11