Connecting Water Supply - Beko WTV 8744 X0A User Manual

• Keep the transportation safety bolts in a safe place for
reuse when the product needs to be moved again in the
NOTE
future.
• Before moving the product, install the transportation
safety bolts in reverse order of the disassembly procedure.

6.4 Connecting water supply

• The water supply pressure required to run the product is
between 1 to 10 bars (0.1 – 1 MPa). (It is necessary to have
10 – 80 litres of water flowing from the fully open tap per
minute.)
CAUTION!
- Attach a pressure reducing valve if water pressure is
• Do not use old or used water inlet hoses on the new
product.
- It may cause stains on your laundry.
• Do not plug the product's cold water inlet to hot water outlet.
- Your laundry may get damaged or the product will switch
EN / 20
b) Remove transportation safety bolts by turning them
gently.
c) After removing bolts, close the holes with plugs
provided in the user manual bag.
higher.
to protection mode and will not operate.
Washing Machine / User's Manual