Changing The Size Of The Pip Window; Changing The Pip Channel; Changing The Location (Rotating) The Pip Mode; Scanning The Available Channels - Samsung 42HD43A Owner's Instructions Manual

S
P E C I A L

Changing the PIP Channel

1
Press the Menu button.
Press the CH
select "PIP", then press the
VOL + button
2
Press the CH
select "Channel," then
press the VOL + or VOL -
button to change the
channel that appears in
the PIP window.
Press the Menu button to
exit.
Note: The PIP channels are not available when RF is set to ANT-B.
Changing the Location (Rotating) in PIP mode
When you press the Locate button repeatedly, the PIP window
moves from corner to corner on the TV screen.

Scanning the Available Channels

This procedure scans all of the available channels and then stores
them in memory.
Press the Scan button, and the memorized channels will appear in
sequence for 2 to 3 seconds per channel.
Press the Scan button again to stop the scanning process.
When Scan stops, the viewing mode will return to its original set-
ting.
56
F
E AT U R E S
button to
button to
(The PIP channels link to ANT-A).
PIP
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
Quick way to access PIP CH:
Simply press the (PIP) "CH" button
on the remote control.