All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung 42HD43A Owner's Instructions Manual

I
N S TA L L AT I O N
Cable with a Cable box that Descrambles All Channels
1
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box. This
terminal might be
labeled "ANT OUT",
"VHF OUT", or simply,
"OUT".
2
Connect the other end of
this cable to the ANT-A
or ANT-B terminal on the
rear of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected
to the ANTENNA IN ter-
minal on your cable box.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the IN terminal on the
cable box.
16
This terminal might be labeled
"ANT IN," "VHF IN," or simply,
"IN."