Timeshift/Record; Timeshift; Record; Dvr Setting - Philips Terrestrial DTR3202 User Manual

Table of Contents

Advertisement

12 Timeshift/Record

Plugging an external Mass Storage Device on the USB port
gives you access to Time Shift/Record a broadcast programme.
Pause a broadcast programme and continue watching it
later (Time Shift )
Record a broadcast programme.
When the space available on the Mass Storage Device runs
out, recording operation of broadcast will stop.
Note
Please use USB 2.0 disk when recording or timeshift.
For timeshift and recording feature we recommend using a
USB or HDD of 2GB or higher.

Timeshift

Time shift Quick mode
1
During a broadcast programme, press "Play/pause" button
to pause the broadcast programme
2
Press "Play/pause" button again to continue watching the
programme (Time Shift)
3
Press "STOP" button to stop Timeshift
Timeshift Setting
1
Press "MENU" button to enter the main menu.
2
Press "UP" or "DOWN" button to highlight "Media Player",
press"RIGHT" or "OK" button to enter the "Media Player"
menu.
3
Press "UP" or "DOWN"button to select "DVR Setting", press
"OK" button to enter the "DVR Setting" menu, then you can
set Timeshift Pause/Auto/Off to active Timeshift.

DVR Setting

Timeshift
Recorded
Timeshift to Record
PS Record
Start Timeshift
1
Ensure Timeshift is actived, in channel mode, press
the"Pause" button to switch to Timeshift mode.
2
Press "RIGHT" or "LEFT" button to move the cursor to
the time you desired to view.
3
Press "OK" button to enter the Timeshift playback.
Play
Trickmodes
During the playback, it is possible to perform the following
actions :
1
Press "PAUSE" button to pause the playback
2
Press "FORWARD" button to fast forward the playback
3
Press "BACKWARD" button to rewind the playback
Stop the Time shift
1
Press "STOP" button to stop TimeShift.

Record

Immediate recording
1
In viewing mode, press "RECORD" button to immediately
start recording on the current program.
2
Press "RECORD" button again can input duration.
3
Press "STOP" button to stop recording, then a confirmation
window appears.
4
Select "Yes" to stop recording. Select "No" to continue
recording.
We recommend using a good brand USB 2.0 HDD or USB
Pause
stick for recording and Timeshift. We cannot guarantee
compatibility with each and every USB drive available in the
30sec
market.
Off
Off
DVR Setting
1
Skip: Press "Left/Right" to switch the jump time. The
option is 30 second, 1 min, 5min, 10 min, 30min. When you
play the recorded program, press the "PREV/NEXT" key can
jump to previous and next point see it.
2
Timeshift to Record: press the left/right key on the remote
control to select ON/OFF. to switch ON/OFF. If you select
"ON" and press "RECORD" key in full screen to record,
it will record not only from the current time, but also the
timeshift part before you pressed "RECORD" key.
3
PS Record: On/Off
TF1
00:00:40
Note
02/0
00:22
00:00:53
100%
772 188 272 TS
25

Advertisement

Table of Contents
loading

Table of Contents