Maximum Spin Speed Is Not Reached; Water Path Control (M24) Is Not Activated As Programmed; Long Program Running Times - Miele W 4840 Descriptive Technical Documentation

DTD no. 11-4800
3.36

Maximum spin speed is not reached

Cause
A wrong option has been set for the program function maximum spin speed.
Remedy
A Set the maximum spin speed to match the appliance model.
3.37

Water path control (M24) is not activated as programmed

Symptom
The water path control is permanently activated in wash programs with the
selection pre-wash .
Cause
In the program function water valves the option valves has been selected.
Remedy
A In the program function water valves set the option to water path control
according to the appliance model.
3.38

Long program running times

Cause
In the program function water plus the option additional rinse cycle has been
selected.
Remedy
A In the program function water plus set the option to water+.
Cause
Child safety sensor
Remedy
A Child safety sensor, refer to 070 2.1 Child safety sensor.
22.12.2006, US_am
Descriptive Technical Documentation
This information should not be duplicated or passed on without Miele approval. All rights reserved.
070-33