Front Panel Remove - Miele W 4840 Descriptive Technical Documentation

DTD no. 11-4800
4.2 Front panel
A Remove the appliance lid, refer to Lid
A Remove the control electronic (EW) and lower fascia panel, refer to Control
electronic (EW) and Fascia support panel
Fig. 2
A Remove the door lock retaining screws.
A Remove the seal clamping ring.
A Loosen the door seal ring from the front panel.
A Loosen the attachment of the front panel above and below the fill hole.
A Loosen the attachment of the front panel at the detergent drawer and at the
top on the right side.
A Tilt the front panel forward at the top and lift it off.
A Installation: Hook the manual release latch into the detergent drawer.
22.12.2006, US_am
Remove
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
Remove, 010 4.1.
Remove, 070 4.7.
010-5