Subscribe to Our Youtube Channel
Related Manuals for Truper PULA-6AM
Summary of Contents for Truper PULA-6AM
- Page 1 Manual Compact 150 mm 45 W 6” Polisher Power Diameter Applies for: Code Model 102633 PULA-6AM PULA-6AM Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Parts using the tool. Mounting Keep this manual for future references. Preparation The illustrations in this manual are for reference Start up only. They might be different from the real tool. Maintenance Troubleshooting Authorized Service Centers Warranty policy PULA-6AM ENGLISH... -
Page 3: Technical Data
Technical data PULA-6AM Code 102633 Description Compact polisher Discos 6” Voltage 127 V Frequency 60 Hz Current 0.4 A Power 45 W Speed 3 500 RPM Work cycle 30 minutes work per 15 minutes rest. Maximum three hours per day Conductors 18 AWG x 2 C with insulation temperature of 221 °F... -
Page 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Page 5: Safety Warnings For Car Polishers
Safety warnings for the use of car polishers This power tool is intended to function as a polisher. Read all safety • Kickback is a sudden reaction to binding or snagging of a rotating warnings, instructions, illustrations and specifications provided with this wheel, backing, brush or other accessory. -
Page 6: Parts
Parts Ergonomic Power cord handle protection Switch Ventilation Power slots cord Motor cover Fixing disc Polyester and cotton polishing bonnet Polishing bonnet (also includes polyester waxing bonnet) support Mounting Placement of the polishing bonnet • To place the polishing bonnet on the bonnet holder, place the polisher upwards. -
Page 7: Start Up
Preparation Polish application • Application of paste polish With a putty knife, or any flat blunt object, apply approximately one teaspoon of paste to the polishing bonnet Spread the paste evenly over the entire surface of the bonnet. NOTE: Do not apply paste directly to the surface to be polished. -
Page 8: Maintenance
Start up Polishing bonnet replacement • Remove the applying bonnet by pulling the edges, Replace it with the polishing bonnet in the same manner as the applying bonnet. • Polish the surface in the same order in which you applied the polish, starting with the large flat surfaces and finishing with the hard-to-reach areas. -
Page 9: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. AGUASCALIENTES DE TODO PARA LA CONSTRUCCIÓN... -
Page 10: Warranty Policy
Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.
Need help?
Do you have a question about the PULA-6AM and is the answer not in the manual?
Questions and answers