Subscribe to Our Youtube Channel
Related Manuals for Truper PULA-7A3-2
Summary of Contents for Truper PULA-7A3-2
- Page 1 Manual Polisher 1.6 Hp 7” Power Disc Applies for Code Model 16713 PULA-7A3-2 PULA-7A3-2 Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Manual before Parts using the tool. Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Notes Authorized Service Centers Warranty Policy PULA-7A3-2 ENGLISH... -
Page 3: Technical Data
Technical Data PULA-7A3-2 Code 16713 Description Polisher Discs 7” Voltage 220 V Frequency 50 Hz / 60 Hz Current Power 1.6 Hp Speed 600 - 3 300 RPM Duty cycle 30 minutes work per 15 minutes idle. Maximum 3 hours per day. -
Page 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Page 5: Safety Warnings For Polishers
Safety warnings for polishers This power tool is intended to function as a polisher, read all safety warnings, instructions, illustrations and specifications provided with this power tool. • Failure to follow the instructions outlined below may • If control of the power tool is lost, the cord may be cut or result in electric shock, fire and/or serious injury. - Page 6 Safety warnings for polishers This power tool is intended to function as a polisher, read all safety warnings, instructions, illustrations and specifications provided with this power tool. • The threaded mounting (installation) of accessories must match the spindle thread. • Accessories that do not match the installation fixtures of the power tool will cause unbalance, excessive vibration and may cause loss of control.
-
Page 7: Parts
Parts Speed Speed Spindle control table lock Handle Power cord Auxiliary Polishing handle Velcro bonnet Spindle disc lock Handle Velcro Trigger Continuous disc switch use button Carbon brush housing cap (x2) Polishing bonnet Assembly Auxiliary handle assembly • Align the auxiliary handle with the polisher head and match the screw orifices. -
Page 8: Start Up
Start Up Start up and operation control • Intermittent operation: Connect the plug into the power outlet. Press switch (A) to start the tool. To stop, release the switch. • Continuous operation: Connect the plug into the power outlet. Press switch (A) and block it pressing the continuous use button (B). To stop, press and release the switch. -
Page 9: Maintenance
Carbon brushes that are out of specification may damage the motor. For best results it is recommended to use original accessories such as Truper´s BOR-PULA-7N. Storage Neatly store the tool in a dry place and protected from dust and water . -
Page 10: Notes
Notes ENGLISH... -
Page 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN AGUASCALIENTES GRAL. -
Page 12: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.
Need help?
Do you have a question about the PULA-7A3-2 and is the answer not in the manual?
Questions and answers