Samsung SyncMaster B1530 User Manual page 12

Connecting
Your Monitor
Installing the
Monitor Driver
Installing VESA
compliant mounting
1. Connect the power cord for your monitor to the power port on the back of the monitor.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
Plug the power cord for the monitor into a nearby outlet.
adaptor.
English > Main > Setup > Connecting Your Monitor