Ricoh B229 Quick Manual page 5

Clean Cleaning Clean Clean ing ing ing Print Print Print Print- - - - H H H H eads
Reference: See "Nozzle Check Pattern", Troubleshooting. Reference: Reference: Reference:
Printing Printing Nozzle Check Pattern Printing Printing Nozzle Check Pattern Nozzle Check Pattern Nozzle Check Pattern
This machine makes prints by spraying inks from nozzles of print-heads and the nozzles are
clogged on rare occasions.
When a specified color is not printed or patchy, the nozzle may be clogged. In this case, check the
nozzles by following steps. When the nozzles are clogged, clean the print-heads.
Before Before the operation: the operation: the operation: the operation:
Before Before
Make sure the Envelope Lever, which is on the right side of the machine,
has been raised. Otherwise, you will be unable to print.
Check that A4 or 8½" × 11"
cannot print the test pattern if paper is not set correctly.
Important Important
Important Important
During printing the test pattern, do not conduct any other operations.
1) Press the [User Tools/Counter] key.
2) Select [Maintenance] using [▲] or [▼], and then press the
[OK] key.
3) Select [Nozzle Check Pattern] using [▲] or [▼], and then
press the [OK] key.
4) Press the [Start] key.
Check the print results of the test pattern. Go on to the next page
and check the results.
eads eads eads
size paper SEF is set in Tray 1. You
Envelope Lever
Normal
Envelope
5