Rebuilding Driver Module For System Update - HighPoint RR2720A Installation Manual

Linux Ubuntu on RR2720A Installation Guide

6 Rebuilding Driver Module for System Update

When the system updates the kernel packages, the driver module rr272x_1x.ko should be
built and installed manually before reboot.
Please refer to the README file distributed with HighPoint RR Series RAID Controller
opensource package on how to build and install the driver module.
7 Appendix A
Support command: help/info/quit/exit/create/delete
Create Command

Syntax
Create Array Type (RAID0/1/10/5/50) Member Disk list (1/1, 1/2|*)
Capacity (100|*)
Note:
The RR2720A controllers can support RAID0/1/10/5/50
Examples
<<< create RAID0
<<< create RAID0 *
<<< create RAID0 * *
Create RAID0 array with all disks and with maximum capacity.
<<< create RAID1 1/1, 1/3 10
Create RAID1 array with disk 1/1 and 1/3 and with 10GB capacity.
<<< create RAID10 *
Create RAID10 array with all disks and with maximum capacity.
<<< create RAID5 *
Create RAID5 array with all disks and with maximum capacity.
<<< create RAID50,3 1/1, 1/2, 1/3, 1/4, 1/5, 1/6
Create RAID50 array with disk 1/1, 1/2, 1/3, 1/4, 1/5, 1/6 and with
sub member count 3 and with maximum capacity.
- 10 -