Traction Control System - Toyota SEQUOIA 2003 Manual

Table of Contents

Advertisement

NOTICE
Do not drive on a dry paved surface
in "L4" (LOCKED) mode. This may
damage the locking mechanism and
the drive system.
SHIFTING BETWEEN "L4" (UNLOCKED)
AND "L4" (LOCKED)
To
shift
between
unlock
and
modes in "L", push the center differential
lock switch.
This can be done at any vehicle speed.
If the indicator light flashes when you
push the center differential lock switch,
drive straight ahead while accelerating or
decelerating.
CAUTION
Never
push
the
center
differential
lock switch if wheels are slipping.
Stop the slipping or spinning before
shifting.
03_SEQUOIA_U (L/O 0301)
NOTICE
Do not drive on a dry paved surface
in "L4" (LOCKED) mode. This may
damage the locking mechanism and
the drive system.
lock

Traction control system

(two−wheel drive models)
The traction control system automatical-
ly helps prevent the spinning of rear
wheels when the vehicle is started or
accelerated on slippery road surfaces.
When the ignition key is turned to "ON",
the system automatically turns on.
CAUTION
Under certain slippery road condi-
tions, full traction of the vehicle and
power against rear wheels cannot be
maintained, even though the traction
control system is in operation. Do not
drive the vehicle under any speed or
maneuvering conditions which may
cause the vehicle to lose traction
control. In situations where the road
surface is covered with ice or snow,
your vehicle should be fitted with
snow tires or
tire chains. Always
drive at an appropriate and cautious
speed for the present road condi-
tions.
2003 SEQUOIA from Jan. '03 Prod. (OM34422U)
151

Advertisement

Table of Contents
loading

Table of Contents