Safety And Instructional Decals - Toro 22602THD Operator's Manual

– Keep container nozzle in contact with the tank during
filling.
•
Stop and inspect the equipment if you strike an object.
Make any necessary repairs before restarting.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 6. Explosion hazard; electrical shock hazard—do not dig in areas
3. Thrown object hazard—keep bystanders a safe distance from
the machine.
4. Thrown object hazard—wear eye protection, pick up debris
before operating.
119-4721
1. Engage
2. Grinding blade
*Always follow manufacturer instructions*
119-4701
3. Disengage, engine runs
*AAA Rent-All 225-291-1356*
5. Crushing hazard of hand—stay away from moving parts, keep
all guards and shields in place.
with buried utility lines; contact local power organizations
before digging.
7. Warning—remove the ignition key (if applicable) and read the
instructions before servicing or performing maintenance.
1. Warning; cutting/dismemberment hazard, grinding
blade—keep hands and feet away from all moving parts,
keep all shields in place; wait for all moving parts to stop.
5
119-4690