Advertisement

Paradox Two-Way Remote Contro V2.1, REM2 Manual

What's New in V2.1

  • Press any key to view the last system status saved by the remote (even when out of range of the system). Press any key again to activate the remote's backlight.
  • If the remote fails to communicate with the system, the LED will flash red rapidly, and a fail beep will occur.

Introduction

The REM2 (previously MG-REM2) is a water-resistant 5-button remote control that provides the user with the status of their system by pressing the [ i ] button. The remote control provides both auditory and visual feedback in an attractive streamlined style. To activate the remote's backlight, press any button twice.

The feedback provided for the user is separated into two categories: security feedback and accessory feedback. Security feedback deals with actions concerning arming and disarming, system in alarm, and panic alarms. Accessories feedback deals with actions concerning the FM tuner and PGMs. The REM2 is available in a 433MHz or 868MHz version. The 868MHz version is not UL approved.

Compatibility

  • MG6160 / MG6130
  • MG5000 / MG5050
  • RPT1
  • RTX3

ID Label

Use the space provided on the back of the unit to identify the remote control's owner.

Range

  • 30m (100ft) with the MG6160 and MG6130
  • 45m (150ft) with the MG5000, MG5050 / RPT1 / RTX3

Battery

One 3V lithium battery (2032). Battery life expectancy is a minimum of 2 years.

How to Replace the Battery

  1. Remove the screw from the back of the remote control and carefully remove the back cover.
  2. Use a non-metallic object, or any plastic device, to push the battery out from under the battery plate (see Figure 1). Avoid using metal as it may cause a short in the board.
  3. Insert the new battery. Make sure the positive side of the battery is inserted face up.
  4. Set the back cover in place, and fasten it with the screw.


of explosion exists if the lithium battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Paradox Two-Way Remote Contro V2.1, REM2 Manual

Advertisement

Need Assistance?

Do you have a question about the Two-Way Remote Control V2.1 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents